• Reduced Heat Transfer Yields More Viable Frags
  Heat is the enemy when cutting corals; it destroys tissue and seriously affects viability, especially with sensitive species like chalice corals. The DFS-100 ReefKeeper Saw employs a continuously cooled narrow diamond blade to dramatically reduce heat transfer to the delicate tissue when cutting. Less heat means more viable frags can become healthy colonies to swap or sell.
• Clearance to Handle Larger Specimens
  Saw through materials as tall as 3 1/2" - something you can't do with cut-ff wheels, tile saws, or any other band saw. So go ahead, tackle that Tubastrea or Favites or any large specimen with confidence.
• Narrow Cutting Path
  Rotary tools and tile saws plow a wide swath through your valuable stock. The narrow diamond blade of the DFS-100 ReefKeeper Saw is removing the least possible amount of material as it cuts, resulting in less waste—up to three times less!

• DFS-100 ReefKeeper Saw no. 91060 includes:
  (1) Stainless steel diamond coated blade
  (1) Non-corrosive work surface
  (3) BladeSert™ blade guides
  (1) User guide
• 90 Day Full Confidence Warranty (see Extended Information)
• Construction: Injection molded, structural grade thermoplastic
• Motor: Permanent magnet, speed controlled, up to 2800 RPM
• Torque: 48 oz.-in
• Work surface: 9" x 10"
• Size: 18" high x 10" deep x 13" wide
• Weight: 9 pounds
• Throat Depth: 4.75" (12 cm)
• Cutting Depth: Up to 3.5" (8.9cm) thick
• Minimum Radius: 3/16" (.5 cm)
• Maximum Radius: 4.75" (12 cm)
• Other Language User Guides: German

Many alternate voltages and or plug configurations are available for this product. See the options box for available choices. Use the Voltage and Plug Chart to view voltage and plug choices for countries around the world.

The inexpensive Replaceable BladeSert™ (Inland no. 90012) is key to the life of your (more expensive) diamond blade (Inland no. 90007). The BladeSert™ will wear with saw use and the slot that the blade passes through will widen over time. Using a worn BladeSert™ allows for excess play in the blade and the blade becomes more likely to break. It is important to replace the BladeSert regularly.

This warranty is granted by INLAND CRAFT PRODUCTS, CO. for 90 days from the original date of purchase. If your Inland machine fails under appropriate use during the warranty period, Inland Craft will repair or replace it at our discretion. If you feel that this product is not performing properly and needs to be serviced, contact INLAND CRAFT for a Return Authorization Number: