www.inlandhobby.com
SEARCH
DEPARTMENTS
Gift Certificates
ReefKeeping
Hobby Saws
Shaper / Grinder
Diamond Hones
Saw Blades
Diamond Drums
Diamond Hone Laps
SwapTop Accessories
Soldering Products
Tools & Supplies
Sintered Carving Burs
Brazed Hole Saws
Diamond Drills & Points
HELPFUL LINKS
Voltage and Plug Chart
Technical Support
Register Your Product
Get Our Newsletter
Looking For Lapidary?
Looking for Stained Glass?
HOW TO GUIDES
Drilling in Aquariums
Build RC Battery Packs
(Your shopping cart is empty)
Home
>
Saw Blades
>
37.7" (96cm) Diamond Blade
Our Price:
$69.95
Product Code:
90007
Description
Technical Specs
Extended Information
Inland carries a range of blade types for our DB-100 BandSaw to fit any sawing need! Use the diamond coated DiamondCut™ blade for wet sawing stone, marble, tile, ceramic, coral, live rock, and other mineral based materials. Use the WoodCut™ blade to saw most types of woods and wood composites. There is also the MetalCut™ Blade for sawing non-ferrous metals, plastics, leather and similar materials.
Blade Length: 37.7" (96cm)
Blade Depth: .130"
Blade Thickness: .022"
Approx. Kerf: .030"
You should always install a new BladeSert™ Blade Guide (Stock no. 90022) whenever you install a new blade. The BladeSert™ will wear with saw use and the slot that the blade passes through will widen over time. Using a worn BladeSert™ allows for excess play in the blade and the blade becomes more likely to break. How fast this happens will depend on use and your sawing style. You should check the BladeSert™ for wear each time you use the saw. Immediately replace the BladeSert™ when it begins to show signs of widening and wear. You can use the "X" behind the slot as a wear guide. When the slot has worn out beyond the reach of the legs of the "X" it is time to replace the BladeSert. It is no longer providing proper support for your blade. The "X" also serves as reminder not to deflect the blade more than this amount in either direction.
Features
Diamond blades have the finest quality diamond crystal
The diamond is bonded to stainless steel using techniques developed and proven for over two decades.
Designed for maximum sawing smoothness and speed.
Accessories for this product...
ReefKeeper Fragging Saw
Our Price:
$284.95
Add
BladeSert Blade Guide
Our Price:
$3.50
Add
DB-100 Hobby Band Saw
Our Price:
$264.95
Add
Band Saw Blade Guide
Our Price:
$3.50
Add
Related Products...
Diamond Saw Blade
Our Price:
$29.95
Add
Diamond Tool Coolant
Our Price:
$6.95
Add
Metal Saw Blade
Our Price:
$21.95
Add
BladeSert Blade Guide
Our Price:
$3.50
Add
Metal Saw Blade
Our Price:
$21.95
Add
Share your knowledge of this product with other customers...
Be the first to write a review
Browse for more products in the same category as this item:
Saw Blades
Saw Blades
>
Band Saw Blades
ReefKeeping
SwapTop™ 8" Diamond Hone
$259.95
1.75 mm Diamond Wire Drill
$2.95
1.0 mm Diamond Wire Drill
$2.95
8" 325 Grit Diamond Flat Lap
$59.95
1.25 mm Diamond Wire Drill
$2.95
8" 600 Grit Diamond Flat Lap
$59.95
6" 3000 Grit Diamond Flat Lap
$39.95
0.75 mm Diamond Wire Drill
$2.95
8" 275 Grit Diamond Flat Lap
$59.95
www.inlandhobby.com
About Us
Contact Us
Privacy Policy
Send Us Feedback
Company Info
|
California Prop 65
|
Product Index
|
Category Index
|
Help
|
Terms of Use
Copyright © Inland Craft Products, Co.. All Rights Reserved.
Sell Online
with Volusion.